Filter By:
Seatposts

$70.00
The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets.
- Convenient finger adjustment of saddle angle
- Unidirectional carbon shaft, forged aluminum head
- No rider weight limit
- 5 year Whisky warranty
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"

$105.00
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7.
- Carbon shaft absorbs trail chatter
- UD carbon shaft, forged aluminum head

$186.99 - $250.00
$250.00
Up to 25% Off
This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options: 0mm and 20mm.
- FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7.
- Setback: 0/20mm.
- Sleek Di2 integration hides the Di2 junction box inside.
- Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.

$146.00
Specialized's Shiv Carbon Seatpost is crafted from Specialized's FACT carbon for a premium blend of ultra lightness, outstanding power transfer and vibration damping. And, its single-bolt clamp holds fast and makes seat adjustments easy. The Shiv Carbon Seatpost only fits Specialized Shiv bicycles.

$104.00
The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most.
- Carbon shaft
- Bonded Aluminum two-bolt head

$186.99 - $249.99
$250.00
Up to 25% Off
The Terra seatpost is the best choice for riding mixed terrain, gravel, or rough roads because it smooths the ride by allowing significant vertical compliance. The secret to this ride smoothing post is in the composite layup that we utilized. By utilizing composites with varying elongation characteristics at specific locations in the post, we enabled vertical compliance for comfort while retaining requisite strength for mixed terrain riding, all at a sub-200 gram weight (27.2 x 330 x 0).
- 18mm Vertical Compliance (20mm offset / Full Extension)
- 194 grams (27.2 x 330mm x 0)
- Advanced composite construction delivers ride-smoothing vertical compliance.
- Available in four sizes: 27.2mm x 330mm x 0 offset, 27.2mm x 380mm x 0 offset, 27.2mm x 330mm x 20mm offset, 27.2mm x 380mm x 20mm offset
- No-Fault crash replacement policy. Lifetime warranty
- Proven clamp design ensures ease of adjustment and slip-free performance.
- System Weight Limit: 275lbs / 125kg

$26.99 - $39.99
Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.

$45.89
3D forged one-piece AL6061-T6 construction
- Wide saddle clamp design reduces rail stress and flex
- Micro-adjust 2 bolt clamp design
- 15mm setback
- ISO-Mountain safety certified

$18.99 - $19.99
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.

$119.00
A specific eTen hydraulic cartridge with single bolt offset saddle clamp allow the enjoyment of droppers at a low price, available with 100mm of travel.
- Black hard anodized stanchion and an air spring, hydraulically locked cartridge
- Single-bolt alloy head
- Remote sold separately

$285.00
- Designed using SRAM Exogram technology
- Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately)
- Matte Black finish
- Seat Post Diameter: 31.6mm
- Seat Post Length: 400mm

$285.00
- Designed using SRAM Exogram technology
- Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately)
- Matte Black finish

$172.00
The carbon Service Course SL seatpost is specifically tuned to be more shock absorbing than the "comfort" seatposts on the market, while still passing our strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you'll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt-head accessibility. The Service Course SL seatpost makes it possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types.
- Distinctive Zipp cosmetics
- Unidirectional Carbon fiber tuned for ride comfort
- Lightweight clamping system
- Lifetime warranty

$60.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts.
- Material: 6061 aluminum
- 2-bolt adjustability
- Minimum insertion length: 90mm

$199.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel

$64.00
TruVativ's Stylo T30 Seatpost is constructed with a 1-piece 3D-forged 7050 aluminum tube to be light and strong. The sturdy dual-bolt head provides loads of adjustability so you can fine tune your saddle position.

$479.95
Thomson Covert Elite Dropper Seatpost-31.6 150mm Black Internal.
We've set the bar with the Thomson covert black dropper post. It's designed around internal routing for clean installation and an updated shift style remote lever for effortless operation.
The Thomson Covert Dropper includes a new shifter oriented remote lever for easy operation. The cartridge-based system is designed to have the longest service life in the industry. If repair is needed, it's fast, affordable, and simple. Every part that makes up the Covert dropper is carefully chosen, and of the highest grade quality available.
- Custom made Norglide bearing bushings and Trelleborg O-Rings and seals
- Thomson saddle clamps and fasteners
- Motul Oil for durability and precision quality.
- The return speed is damped in the last 15mm of upward travel to be gentle on your seating area.
- 60mm (Ø27.2 only), 100mm, 125mm, 150mm of infinite travel.
- Passes ISO 4210 fatigue and strength tests for seat posts.

$31.99
• Aluminum
• Coil spring provides plush suspension
• Adjustable pre-load design
• Micro-adjust seat clamp
• 450 grams

$33.99
• Aluminum
• Coil spring suspension
• Adjustable pre-load design
• Collar adjustment for play removal
• 7/8-inch seat-clamp diameter

$225.00
This is the first seatpost that’s compliant AND aerodynamic—a total win, win. We initially developed the Pavé seatpost for the all-new Roubaix, and it’ll make a fantastic addition to your Tarmac SL6. Of course, it’s also designed to make fine-tuning your saddle position a breeze with a single-bolt adjustable head and two setback options.
- FACT carbon construction paired with a D-shaped seatpost that's compatible with the 2020 Roubaix and Taramc SL6.
- Engineered to have the saddle move in a perfect arc, aka a back & downward motion.
- Setback: 20mm/0mm
- Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt.
- Length: 380mm/450mm
- Approximate Weight: 209g

$186.99
$250.00
25% Off
This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options—0mm and 20mm.
- Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.
- FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7.
- Setback: 0/20mm.
- Sleek Di2 integration hides the Di2 junction box inside.

$300.00
- Aerodynamic FACT carbon construction that’s compatible with the 2019 Venge
- Sleek Di2 integration hides the Di2 junction box inside
- Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt

$633.00
The new Reverb AXS XPLR dropper post delivers more control, confidence, and fun on gravel roads everywhere. Getting the saddle out of the way means more room to move, saving you from awkward maneuvering and sketchy descents. We created an all-new design complete with lightweight air-only internals featuring built-in compliance we call ActiveRide. It's like travel for your saddle. Enabled by SRAM AXS technology, Reverb AXS XPLR is part of the ultimate personalized cockpit.
- New 27.2mm Reverb AXS XPLR delivers more control, confidence, and fun for gravel
- ActiveRide—Air only internals provide a fully rigid top-out position. With the touch of your AXS controller, you've got built-in compliance to ensure comfort and control over the roughest sections of gravel
- Two travel options to choose—50mm or 75mm
- Saddle clamp options compatible with 7x10 oval carbon rails.
- Seat post length includes 400mm and 350mm (50mm drop only)
- AXS Technology allows rider customization via the AXS Mobile App
- AXS handlebar controls (drop or flat bar)
- Shared battery with all other SRAM AXS enabled components
- System is completely waterproof and dustproof to IP69K—take it anywhere
- SRAM AXS battery and charger included
SPECIFICATIONS:
- TRAVEL: 50mm, 75mm
- POST DIAMETER: 27.2mm
- POST LENGTH: 350mm, 400mm
- REMOTE: AXS Controller Sold Separately
- SADDLE RAIL COMPATIBILITY: Round/Oval (7x9 & 7x10), Round/Oval (7x9)
- WEIGHT (G): 562
- WEIGHT BASED ON: 75mm Travel 400mm Length W/O battery - Battery 25g

$269.99
- Internal Routed, Infinitely Adjustable Design
- Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System
- Durable 3D Forged Head - With 7075-T6 Forged Clamp
- Featherlight Thumb Actuation - Industry Leading
- Intelligent Keyway System - Ensures Minimal Play
- Easiest Installation - Cable Head Attaches At Base
- Cold Weather Approved - Tested Down To -20C.
- 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware
- Remote Position: On handlebar
- Cable Routing: Internal
- Offset: 0mm
- Clamp Type: Standard, double bolt
- Seat Post Material: Aluminum
- Seat Post Weight: 510g
Page 1 of 4
Next page