Brakes/Levers/Pads

Our mountain rim brake pads are available both with a threaded or smooth post.

Jagwire Centerlock Rotor Lockrings securely attach a Centerlock rotor to a hub - Aluminum construction - Outer tool serrations for use with 15mm-20mm axle hubs

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Compatible with Shimano Dura-Ace R9170, Metrea U5000, Ultegra R8070, and Road RS305, RS405, RS505, and RS805 - Compatible with Rever MCX1 Flat-Mount and MCX2 Flat-Mount

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

Jagwire's Pro LR2 rotors are made to improve the performance of any disc brake-equipped bike. Utilizing a 2-piece construction design, the LR2 rotors have a stainless steel braking surface to provide quiet, consistent stopping power. The lightweight aluminum inner spider features an integrated concentric ring and reinforced rivet joints to resist warping and improve durability. - Stainless steel machined braking surface resists corrosion and is tuned to reduce braking noise - Aluminum spider helps keep weight to a minimum - Compatible with all popular disc brake pad compounds (organic/resin, metallic, and semi-metallic) - Available to fit on ISO 6-bolt or Center Lock hubs, Jagwire offers options for nearly any disc brake bike - 6-bolt rotors include T25 mounting hardware - NOTE: LR2 rotors are NOT compatible with brakes with pads extend that below the caliper body. Examples include Avid BB7, Avid Juicy, Hayes HFX, and Hayes MX1

Jagwire's Road Pro Brake Pads fit Campagnolo, Shimano and SRAM sidepull brakes. They feature Jagwire's tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy pad replacement without losing your brake shoe position. And there are wheel guides on the shoes to help when you're putting a wheel back on.

Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.

Disc brake pads with industry-leading compounds for consistent and confident performance, designed to fit a variety of Shimano brakes. - Jagwire Pro E-Bike pads feature a friction compound developed specifically for the unique needs of pedal-assist E-bikes - Tuned to provide more stopping power and durability than typical pads, with consistent modulation and little braking noise - Steel backing plate - Compatible with Shimano Deore (T615, M525, M515), Alivio (M4050), Acera (M3050), Non-Series MT500, MT400, MT200, M575, M486, M485, M475, M465, M447, M446, M445, M416, M415, M395, M375, M365, M355, M315, UR300 - Compatible with TRP HY/RD (Post Mount), Hylex (Post Mount), Slate X2, Spyre, Spyke - Compatible with Tektro Aquila, Auriga, Dorado, Draco, Gemini, HD-E350, HD-E715, HD-M285, HD-M286, HD-T285, HDC330, Orion, Vela - Compatible with Promax F1, Solve, Lucid, Decode R, eCapsule, DSK-909

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No - Weight: 204 g

This high-end version of the BB7 has a durable anodized finish and titanium hardware, as well as lighter brake pads. - For use with short cable-pull levers - Includes aluminum-backed organic pads - For use with short cable-pull levers - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No - Weight: 184 g

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.

- High Performance Brake Pads - Disc Pad Material: Organic

- Forged aluminum arms - 102mm arm length - 158g

- Dual pivot caliper brake - Melt forged aluminum arms - Quick release mechanism - Dimension : 39-52mm - Designed for 28C tire

- Top mount levers for use with caliper or cantilever brakes - Forged aluminum - Hinge clamp style - Return spring and reach adjustment - Black - 90g / pair

Semi-Metallic replacement pads for the DH-R EVO, G-Spec DH-R, Quadiem, Slate T4, Slate G-Spec and "Select 4-Piston Tektro Brakes" - Semi-metallic compound for minimal noise with maximum power - Fits all TRP four piston calipers and Tektro four piston calipers - Color: TRP red - Sold per wheel - Replacment pad for Tektro Q10YS

TRP Alloy Rim brake pads are specifically designed for aluminum rim braking surfaces. - High performance brake pads - Aluminum rim compound - Fits all TRP road brakes, InPlace cartridges, Shimano and Shimano compatible road cartridges - Color: Black - Sold in sets of 4 (2 pairs)

- Ergonomic lever blade - Advanced 9mm internal brake lever piston - 5mm hydraulic brake hose - High performance hydraulic brake fluid - Hybrid pistons - High performance resin pad compound - New high flow caliper - 2.3mm thick rotors - CNC machined and marked adapters - Compatible with 223/220/203/180/160/140mm rotors (sold separately) - Weight: 310g (Front without rotor and adapter)

TRP Disc Brake Pads - Semi-Metallic, Steel Backed, For Hylex, Hylex RS, and HD-T190 Flat-Mount Calipers

Full sintered metallic replacement pads for flat mount Hylex RS brakes. - Full metallic compound for maximum performance and power - Fits Hylex RS brakes - Color: TRP Copper - Sold per wheel

With the evolution of disc brakes on time trial bikes, TRP saw the need for a high-performance hydraulic TT disc brake resulting in the all-new HD-T910. We took a unique approach to the time trial brake by combining speed and style which resulted in the TT Hydro. Initially, the lever was handcrafted from clay before being finished off in aluminum. This allowed our designers to offer maximum ergonomics and an elegant visual appearance. From there it was forged from alloy, given a replaceable rubberized grip, and finished off with a carbon lever blade. The lever is matched to a black flat mount caliper designed to offer controlled braking at any speed. The levers come in two widths for differing bar diameters: - For bars measuring a diameter between 22-24 mm: HD-T910 - For bars measuring a diameter between 24-25 mm: HD-T912 - HD-T910 (OD 22-24 mm) - HD-T912 (OD 24-25 mm) - Carbon Fiber Lever Blade - Forged Alloy Lever Body - TRP 2-Piston Flat Mount Caliper - Integrated and Replaceable Grip - Anodized Black - 5.0 mm High Quality Hose with 1900 mm length - Factory Pre-Bled with EZ-Plug System - Blip or Di2 Shifter Adapter Inserts Available - Top Loading Pad Design - 390g (front) - Minimum bar insertion is 55mm

TRP HY/RD disc brake calipers have the power and modulation of hydraulic disc brakes. True ‘plug-and-play’ compatibility with existing cable actuated systems. - Self-contained hydraulic caliper incorporates master cylinder - Hydraulic system self-adjusts for pad wear - Compatible with all mechanical road and CX brake levers - Brake pad composite is Resin with Metal Fibers - Resin with Metal Fibers pads are compatible with Resin-Only type rotors as well as standard rotors